EXPLORE MORE CATEGORIES
Digital Electronics Lab
Leading Manufacturer of pipo/ sipo shift register, rf power amplifiers, logic gate trainer, adder / subtractor trainer, flip flop trainer and modulo counter trainer using 74190 from Noida.
Pipo/ Sipo Shift Register
Product Price: Rs 4,000 / PieceGet Best Price
Product Brochure
Product Details:
| Usage/Application | Industrial, Commercial, Labs |
| Model Number | ET-PIPO |
| Enclosed In | Wooden/plastic box |
| Interconnections | 2mm banana Patch cords |
| Indicator Type | LED |
| PCB Type | Glass Epoxy SMOBC PCB |
Pipo/ Sipo Shift Register is used to study operation and function of parallel in parallel out and serial in serial out shift registers.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study parallel in parallel out shift registers(PIPO)
On board circuit to study serial in parallel out shift registers(SIPO)
On board high & low switches.
On board mode control
On board clock switch
On board clear switch
On board four parallel inputs
On board four parallel outputs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
RF Power Amplifiers
Product Price: Rs 2 Lakh / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Mounting Type | Table |
| Input Impedance | 50ohm |
| Cooling | Forced air |
| Power Requirements | 100 to 240V ac |
| Brand | Laplace |
| Application | Industrial |
These RF amplifiers utilize fully isolated linear MOSFET or advanced GaAs FET devices, which provide high gain, wide dynamic range and excellent third order intercepts. High efficiency and reliable operation are achieved by employing unique RF combining circuits, RF microstrip networks, sophisticated thermal design, custom machined housing and heavy duty components. The high power RF amplifiers undergo extensive burn-in prior to final test and inspection.
The amplifiers all feature 50ohm input & output impedance, thermal and mismatch protection, standby switch and internal fan assisted cooling. Product FeaturesHigh efficiency
Compact and lightweight
Wide dynamic range
Proven reliability
0dB input for full power at output
Matched to EMC test standards IEC61000-4-3 and IEC61000-4-6
Additional Information:
- Item Code: RFPowerAmplifiers
- Production Capacity: 100
- Delivery Time: 4 to 6 Weeks
- Packaging Details: Packed in Corrugated Box
Get Best QuoteRequest A Callback
Logic Gate Trainer
Product Price: Rs 3,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Model | ET-LG |
| Indicator Type | LED |
| PCB Type | Glass Epoxy SMOBC PCB |
| Interconnections | 2mm banana Patch cords |
| Enclosed In | Wooden/plastic box |
| No of Output LEDs | 5 |
Logic Gate Trainer is used to study different types of logic gates. This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board NOT, AND, OR, NAND, XNOR, XOR & NOR gates
5 input switches to give High & Low i/p
5 output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Adder / Subtractor Trainer
Product Price: Rs 3,800 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Usage/Application | Industrial |
| Display Type | Analog |
| Material | Mild Steel |
| Frequency | 60 Hz |
| Power | 12 V |
| Shape | Rectangular |
ET-AS is used to study Adder and Subtractor. This kit has been designed keeping students in mind so its very easy to understand and use.
Specification:-
On board circuit to study
Half Adder
Full Adder
Subtractor
On board Low & High inputs
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Flip Flop Trainer
Product Price: Rs 6,900 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Model | ET-FF |
| Usage | Laboratory |
| Indicator Type | LED |
| PCB Type | Glass Epoxy SMOBC PCB |
| Interconnections | 2mm banana Patch cords |
| Enclosed In | Wooden/plastic box |
Flip Flop Trainer is used to study different types of FLIP-FLOPS. This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study:
S-R flip flop
J-K flip flop
D-flip flop
T-flip flop
Master-slave flip flop
On board pulsar switch
On board clear switch
On board Low & High inputs
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Modulo Counter Trainer Using 74190
Product Price: Rs 3,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Counter IC | IC74190 |
| Clock Generator IC | IC4060 |
| Indicator Type | LED |
| PCB Type | Glass Epoxy SMOBC PCB |
| Interconnections | 2mm banana Patch cords |
| Enclosed In | Wooden/plastic box |
Modulo Counter Trainer Using 74190 is used to study different counter using IC74190.This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board 74190 to study Synchronous Up/Down counter
On board clock generator using IC4060
On board Low & High input
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Arithmatic Logic Unit Trainer
Product Price: Rs 3,450 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Usage/Application | Laboratory |
| Brand | EXCEL |
| Type | Digital |
| Material | Metal |
| Automation Grade | Semi-Automatic |
| Color | White |
| Power Supply | 12 V |
ET-ALU is used to study Arithmatic Logic Unit.
This kit has been designed keeping students in mind so it is very easy to understand and use.
Specification:-
On board circuit to study ALU
In board Input Switches for High & Low inputs
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Analog to Digital Converter Trainer
Product Price: Rs 4,500 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Voltage Range | Variable source 0 to 5v |
| No of Input Channels | 8 |
| Output LEDs | 8 |
| PCB Type | Glass Epoxy SMOBC PCB |
| Application | Industrial, Commercial |
| Interconnections | 2mm banana Patch cords |
Analog to Digital Converter Trainer is used to study analog to digital convertor using ADC 0809. This kit has been designed keeping students in mind so its very easy to understand and use.
Details:
On board ADC 0809
On board eight channel inputs
On board 8 Output LEDs
On board switches for channel selection
On board clock
On board option for EOC and SOC
On board variable source 0 to 5v
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
Get Best QuoteRequest A Callback
30 Ghz Rf Synthesizer
Product Price: Rs 65,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Brand | Scientific |
| Dimensions | 120 x 64 x 188 mm |
| Model Name/Number | RF Synthesiser |
| Frequency | 30MHz to 2.4GHz |
| Indication | Bargraph indication of leve |
| Weight | 4.5Kg |
Controls the intensity of that signal
Monitors the condition of the EUT
Acts as the interface between a PC and the test
Includes PC (Windows) software to enable very simple operation
Additional Information:
- Item Code: RFSynthesiser
- Production Capacity: 100
- Delivery Time: 4 to 6 Weeks
- Packaging Details: Packed in Corrugated Box
Get Best QuoteRequest A Callback
Adder Subtractor Trainer Using Gates
Product Price: Rs 5,800 / PieceGet Best Price
Product Details:
| Model | ET-AS-G |
| Usage/Application | Industrial, Commercial, Labs |
| EX OR Gate | One 2 input |
| NOT Gate | Three |
| PCB Type | Glass Epoxy SMOBC PCB |
| Interconnections | 2mm banana Patch cords |
| NAND Gate | Four 2 input , Five 3 input , One 4 input |
Adder / Subtractor Trainer Using Gates is used to study Adder and Subtractor.In this kit the student can construct adder/subtractor circuits using different available gates. This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study
Half Adder
Full Adder
Subtractor
Four 2 input NAND Gate
Five 3 input NAND Gate
One 4 input NAND Gate
One 2 input EX-OR gate
Three NOT Gate
On board Low & High inputs
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Digital to Analog Converter Trainer
Product Price: Rs 3,850 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Usage/Application | Laboratory |
| Display Type | Analog |
| Brand | EXCEL |
| RAM | 1 GB |
| Material | Mild Steel |
| Power | 12 V |
ET-DAC is used to study digital to analog convertor using DAC 0800 .This kit has been designed keeping students in mind so its very easy to understand and use.
Specification:-
On board DAC 0800
On board eight digital inputs switches
On board test points to measure the voltage
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
ADC and DAC Trainer
Product Price: Rs 5,800 / PieceGet Best Price
Product Details:
| Usage/Application | Industrial, Commercial, Labs |
| Model Number | ET-ADDA |
| No of Output LEDs | 8 |
| Enclosed In | Wooden/plastic box |
| PCB Type | Glass Epoxy SMOBC PCB |
| Interconnections | 2mm banana Patch cords |
ADC and DAC Trainer is used to study analog to digital convertor using ADC 0809 and digital to analog converter using DAC 0800 .This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board ADC (0809) and DAC(0800)
FOR ADC:
On board eight channel inputs
On board 8 Output LEDs
On board switches for channel selection
On board ADC clock
On board option for EOC and SOC
On board variable voltage source 0 to 5v
On board test point to measure voltage
FOR DAC:
On board High & Low inputs
On board test point to measure voltage
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
ADC and DAC Trainer
Product Price: Rs 5,800 / PieceGet Best Price
Product Details:
| Usage/Application | Industrial, Commercial, Labs |
| Model Number | ET-ADDA |
| Interconnections | 2mm banana Patch cords |
| PCB Type | Glass Epoxy SMOBC PCB |
| Indicator Type | LED |
| Enclosed In | Wooden/plastic box |
ADC and DAC Trainer is used to study analog to digital convertor using ADC 0809 and digital to analog converter using DAC 0800 .This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board ADC (0809) and DAC(0800)
FOR ADC:
On board eight channel inputs
On board 8 Output LEDs
On board switches for channel selection
On board ADC clock
On board option for EOC and SOC
On board variable voltage source 0 to 5v
On board test point to measure voltage
FOR DAC:
On board High & Low inputs
On board test point to measure voltage
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Modulo Counter Trainer
Product Price: Rs 4,000 / PieceGet Best Price
Product Details:
| Usage/Application | Industrial, Commercial, Labs |
| Model Number | ET-MC |
| Indicator Type | LED |
| PCB Type | Glass Epoxy SMOBC PCB |
| Enclosed In | Wooden/plastic box |
| Interconnections | 2mm banana Patch cords |
Modulo Counter Trainer used to study different counter that can be designed using J-K Flip flops and gates.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study:
Ripple counter in count-up mode
Ripple counter in count-down mode
Ripple counter in count-up/count-down mode.
Ring counter
Variable modulo counters.
Decade counter.
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
On board pulsar switch and clear switch
On board Low & High inputs
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
Get Best QuoteRequest A Callback
4 Bit Synchronous/ Asynchronous Counter Trainer
Product Price: Rs 4,000 / PieceGet Best Price
Product Details:
| Usage/Application | Industrial, Commercial, Labs |
| Model Number | ET-DTC |
| Indicator Type | LED |
| Interconnections | 2mm banana Patch cords |
| Enclosed In | Wooden/plastic box |
| PCB Type | Glass Epoxy SMOBC PCB |
4 Bit Synchronous/ Asynchronous Counter Trainer is used to study asynchronous and synchronous counter using J-K flip flop and gates.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study Synchronous Counter
On board circuit to study Asynchronous Counter
On board Low & High input
On board clear and clock switch
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Shift Register and Counter Trainer
Product Price: Rs 4,000 / PieceGet Best Price
Product Details:
| Usage/Application | Industrial, Commercial, Labs |
| Model Number | ET-RC |
| Indicator Type | LED |
| PCB Type | Glass Epoxy SMOBC PCB |
| Interconnections | 2mm banana Patch cords |
| Enclosed In | Wooden/plastic box |
Shift Register and Counter Trainer is used to study different shift register and ring counter using J-K flip-flop and gate.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study Left Shift Register
On board circuit to study Right Shift Register
On board circuit to study Ring Counter
On board Low & High input
On board clear and pulsar switch
On board Output LEDs
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
ET-MVT Multi Vibrator Trainer
Product Price: Rs 3,850 / PieceGet Best Price
Product Details:
| Usage/Application | Industrial, Commercial, Labs |
| Model Number | ET-MMV |
| Indicator Type | LED |
| PCB Type | Glass Epoxy SMOBC PCB |
| Enclosed In | Wooden/plastic box |
| Interconnections | 2mm banana Patch cords |
Monostable Multi Vibrator Trainer is used to study operation and function of mono stable multivibrator.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study monostable multivibrator using 74121 & 74123
On board high and low inputs
On board clock input
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback
Digital IC Trainer
Product Price: Rs 7,750 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Display Type | Analog |
| Brand | Excel |
| Model | ET-DIT |
| Usage | Laboratory |
| Material | Mild Steel |
| Frequency | 50 Hz |
ET-DIT is used to study different Digital ICs.
This kit has been designed keeping students in mind so it is very easy to understand and use.
Specification:-
On board 7408(AND Gate), 7432(OR Gate), 7400(NAND Gate), 7402(NOR Gate), 7404(NOT Gate), 7486(XOR Gate), 7490(Decade Counter), 7476(J-K Flip Flop), 7420(4 i/p NAND Gate), 7425(4 i/p NOR gate), 74121(Mono Stable Multivibrator), 74163(Synchronous Counter)
On board 8 TTL inputs with dual color LEDs to indicate HIGH & LOW
8 Output LEDs
2 Seven Segment Display with BCD to 7 segmment conversion
On board 1Hz, 10Hz, 1KHz, & 1MHz clock
On board Logic Probe
On board Manual Pulsar( Low to High & High to Low)
On board +5 V and GND
On board 20PIN ZIF socket for further expansion.
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-DIT
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 1-2 weeks
- Packaging Details: Packed in corrugated box
Get Best QuoteRequest A Callback
Automatic Mltiplexer Trainer Kit
Product Price: Rs 3,500 / PieceGet Best Price
Product Details:
| Power Supply | 5 - 12V DC |
| Phase | single phase |
| Type | Fully Automatic |
| Display Type | Digital |
| Automation Grade | Automatic |
| Channels | 5 |
ET-MUX/DMUX is used to study Multiplexer & Demultiplexer. This kit has been designed keeping students in mind so its very easy to understand and use.
Specification:-
-
On board circuit to study 4:1 MUX
-
On board circuit to study 1:4 DEMUX
-
On board High & Low inputs
-
On board Switches for select lines
-
On board Output LEDs
-
ON/OFF switch and LED for power indication.
-
Bare board Tested Glass Epoxy SMOBC PCB is used.
-
Block Description Screen printed on glassy epoxy PCB
-
All interconnections are made using 2mm banana Patch cords
-
Supplied with User manual and patch cords
-
With built-in power supply
-
Enclosed in a wooden/plastic box
Get Best QuoteRequest A Callback