Call 08046051612 48% Response Rate

Send Email

SENSOR AND INSTRUMENTATION LAB

Our product range includes a wide range of strain gauge trainer, thermocouple trainer kit, thermistor characteristics trainer, measurement frequency trainer, rtd measurement trainer and rtd / thermocouple trainer.
Strain Gauge Trainer
  • Strain Gauge Trainer
  • Strain Gauge Trainer

Strain Gauge Trainer

Product Price: Rs 10,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial, Commercial
Digital Meter3 (1/2) digits
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box
PCB TypeGlass Epoxy SMOBC PCB
Strain Rosette Fixed to Plate4 number
Indicator TypeLED

Strain Gauge Trainer is used to study Strain Gauge. The strain gauge sensor has 4 number of strain rosette. The student applies strain using the weights provided with the kit and measure the corresponding voltage.This kit has been designed keeping students in mind so its very easy to understand and use.


Details
:-

  • 4 number strain rosette fixed to plate

  • Optional facility for Quarter and Half Bridge configuration

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • Built in Zero Offset

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cordsWeights of 1Kg, 500g, 200g, 100g, 50g provided with the kit (for applying strain)

  • With built-in power supply

  • Enclosed in a wooden/plastic box

  • Note : Sensor of higher capacity also available on request



Additional Information:

  • Item Code: ET-STRAIN
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Thermocouple Trainer Kit

Thermocouple Trainer Kit

Product Price: Rs 6,300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
ModelET-THRM
UsageIndustrial
Digital Meter3 (1/2) digits
PCB TypeGlass Epoxy SMOBC PCB
TemperatureUpto 100 degrees
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box

Thermocouple Trainer is used to study Thermocouple transducer. The kit comes with all the necessary accesories like heating rod, thermometer meter ,etc required by the user.This kit has been designed keeping students in mind so its very easy to understand and use.


Details
:-

  • Thermocouple(J type) sensor provided with kit

  • Temperature upto 100 degrees

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • Supplied with heating rod and thermometer

  • With built-in power supply

  • Enclosed in a wooden/plastic box

Note: K type Thermocouple is also available



Additional Information:

  • Item Code: ET-THRM
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Thermistor Characteristics Trainer

Thermistor Characteristics Trainer

Product Price: Rs 5,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationIndustrial, Commercial
Digital Meter3 (1/2) digits
Model NumberET-TH
PCB TypeGlass Epoxy SMOBC PCB
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box
TemperatureUpto 100 degrees
Indicator TypeLED

Thermistor Trainer is used to study thermistor transducer. The kit comes with all the necessary accessories like heating rod, thermometer meter ,etc required by the user. This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

  • Thermistor sensor provided with kit

  • Temperature upto 100 degrees

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • Supplied with heating rod and thermometer

  • With built-in power supply

  • Enclosed in a wooden/plastic box



Additional Information:

  • Item Code: ET-TH
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Measurement Frequency Trainer

Measurement Frequency Trainer

Product Price: Rs 6,300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Power Supply5 - 12V DC
PhaseThree phase
Model Name/NumberET-MFR
TypeFully Automatic
Display TypeAnalog
Usage/ApplicationIndustrial
ColorYellow


Additional Information:

  • Item Code: ET-MFR
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Rtd Measurement Trainer

Rtd Measurement Trainer

Product Price: Rs 7,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandExcel
Modelet-Rtd
UsageLaboratory
ConditionNew
TypeElectrical

ET-RTD is used to study RTD transducer. The kit comes with all the necessary accesories like heating rod, thermometer meter ,etc required by the user.This kit has been designed keeping students in mind so its very easy to understand and use.

Specification:-

  • RTD sensor provided with kit

  • Temperature upto 100 degrees

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cordsSupplied with User manual and patch cords

  • Supplied with heating rod and thermometer

  • With built-in power supply

  • Enclosed in a wooden/plastic box



Additional Information:

  • Item Code: ET-RTD
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
RTD / Thermocouple Trainer

RTD / Thermocouple Trainer

Product Price: Rs 8,050 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model NumberET-RTD/THRM
Enclosed InWooden/plastic box
TemperatureUpto 100 degrees
Digital Meter3 (1/2) digits
Indicator TypeLED
PCB TypeGlass Epoxy SMOBC PCB
Interconnections2mm banana Patch cords

RTD / Thermocouple Trainer is used to study RTD and Thermocouple transducer. The kit comes with all the necessary accesories like heating rod, thermometer meter ,etc required by the user.This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

  • RTD and Thermocouple (Jtype)sensor provided with kit

  • Temperature upto 100 degrees

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • Supplied with heating rod and thermometerWith built-in power supply

  • Enclosed in a wooden/plastic box

  • Note: K type Thermocouple is also available



Additional Information:

  • Item Code: ET-RTD-THRM
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Pressure Trainer
  • Pressure Trainer
  • Pressure Trainer

Pressure Trainer

Product Price: Rs 15,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model NumberET-Pressure
Indicator TypeLED
PCB TypeGlass Epoxy SMOBC PCB
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box
Pressure Sensor0 to 10 Kg/cm2
Digital Meter3 (1/2) digits

Pressure Trainer is used to study Pressure transducer .The kit comes with pressure tank, pump, pressure gauge , etc. This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

  • Provided with Pressure Sensor (0 to 10 Kg/cm2)

  • Provided with Pressure gauge

  • Provided with Pressure Tank

  • Pump for applying pressure included

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • Built in Zero Offset

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCBAll interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • With built-in power supply

  • Enclosed in a wooden/plastic box

  • Note : Sensor of higher capacity also available on request



Additional Information:

  • Item Code: ET-PRESSURE
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
LOAD Cell Trainer

LOAD Cell Trainer

Product Price: Rs 12,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model NumberET-LOAD
Digital Meter3 (1/2) digits
Indicator TypeLED
PCB TypeGlass Epoxy SMOBC PCB
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box

LOAD Cell Trainer is used to study LOAD Cell sensor. The load cell sensor has 4 number of load rosette. The student applies load using the weights provided with the kit and measure the corresponding voltage. This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

  • 4 number strain rosette fixed to load cell

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • Built in Zero Offset

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • Weights of 1Kg, 500g, 200g, 100g, 50g provided with the kit (for applying strain)

  • With built-in power supply

  • Enclosed in a wooden/plastic box

  • Note : Sensor of higher capacity also available on request



Additional Information:

  • Item Code: ET-LOAD
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Humidity Sensor Trainer

Humidity Sensor Trainer

Product Price: Rs 8,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
UsageLaboratory
ModelET-HUM
Indicator TypeLED
PCB TypeGlass Epoxy SMOBC PCB
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box
Digital Meter3 (1/2) digits

Humidity Sensor Trainer is used to study Humidity Sensor. This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

  • On board humidity sensor

  • Test points are provided for measuring the voltage

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • With built-in power supply

  • Enclosed in a wooden/plastic box



Additional Information:

  • Item Code: ET-HUM
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Low Noise & Low Frequency Amplifier for Biomedical Application

Low Noise & Low Frequency Amplifier for Biomedical Application

Product Price: Rs 10,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model NumberET-BMA
IndicatorLED
ApplicationIndustrial, Commercial, Labs
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box

Low Noise & Low Frequency Amplifier for Biomedical Application is used to study Low Noise & Low Frequency Amplifier used in Biomedical applications . Using this kit the student can measure Pulse rate. This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

· Biomedical pulse sensor(finger clip type)

· On board amplifier circuit for output of biomedical sensor

· ON/OFF switch and LED for power indication.

Test points to analyse the signal

· All interconnections are made using 2mm banana Patch cords

· Supplied with User manual and patch cords

· With built-in power supply

· Enclosed in a wooden/plastic box

Additional Information:

  • Item Code: ET-BMA
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
Proximity Sensor Trainer

Proximity Sensor Trainer

Product Price: Rs 6,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
UsageLaboratory
ModelET-PROXIMITY
Indicator TypeLED
PCB TypeGlass Epoxy SMOBC PCB
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box

Proximity Sensor Trainer is used to study Proximity Sensor. This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

  • On board Proximity sensor

  • On board DC motor to see the application of Proximity sensor

  • Test points to analyse the signal

  • On board variable supply to vary the speed of DC motor

  • ON/OFF switch and LED for power indication.

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • With built-in power supply

  • Enclosed in a wooden/plastic box



Additional Information:

  • Item Code: ET-PROXIMITY
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
LVDT Trainer

LVDT Trainer

Product Price: Rs 13,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationLaboratory
BrandEXCEL
ModelET-LVDT
TypeDigital
MaterialSteel
Automation GradeSemi-Automatic

ET-LVDT is used to study Linear variable differential transducer. The kit has all the necessary sections like oscillator, amplifier, rectifier ,digital meter ,etc required by the user.This kit has been designed keeping students in mind so its very easy to understand and use.

Specification:

  • In built excitation frequency

  • Transducer : Linear Variable Differential Transducer(LVDT)

  • Range: 10mm

  • Moving action: 6 wires, spring loaded type axial

  • Micro meter(screw gauge) for moving the LVDT

  • Test points are provided for observing waveform on CRO

  • On board Digital meter: 3 ½ digits

  • On board Amplifier Section

  • On board Rectifier Section

  • ON/OFF switch and LED for power indication.

  • Bare board Tested Glass Epoxy SMOBC PCB is used.

  • Block Description Screen printed on glassy epoxy PCB

  • All interconnections are made using 2mm banana Patch cords

  • Supplied with User manual and patch cords

  • With built-in power supply

  • Enclosed in a wooden/plastic box



Additional Information:

  • Item Code: ET-LVDT
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback
USB Data Acquisition Trainer

USB Data Acquisition Trainer

Product Price: Rs 14,350 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Parameter To Be MonitoredHumidity
Export Of DataCSV
DisplayAnalog
Dimension12oox600x300(LxWxH) mm
Usage/ApplicationIndustrial
ET-USB DQAEXCEL

ET- USB-DAQ is used to acquire sensor outputs through USB. This kit has been designed keeping students in mind so its very easy to understand and use.

Specification:-

· On board USB Data acquisition Module

· 4 Channel to acquire to the signal

· On board variable DC source 1.2 to 10 V

· On board AC source with variable frequency

· Powerful software Data Acquisition software Supplied with the kit.

· ON/OFF switch and LED for power indication.

· All interconnections are made using 2mm banana Patch cords

· Supplied with User manual and patch cords

· With built-in power supply

· Enclosed in a wooden/plastic box

Additional Information:

  • Item Code: ET-USB-DAQ
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: CORRUGATED BOX
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Excel Technologies. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.