ANALOG ELECTRONICS LAB - AMPLIFIERS
Common Emitter Amplifier
Minimum Order Quantity: 1 Piece
Product Brochure
Type | Analog |
Input Voltage | 220V |
Warranty | 1 year against any manufacturing defect |
Condition | New |
PCB Type | Gassy Epoxy PCB |
Interconnections | 2mm banana Patch cords |
Enclosed In | Wooden/plastic box |
Indicator | LED |
Common Emitter Amplifier is used to study common emitter amplifier.
This kit has been designed keeping students in mind so its very easy to understand and use
Details:-
On board circuit to study common emitter amplifier.
On board POT for varying amplitude of input signal.
On board test point to analyse the signal
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-CEAMP
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
RC Coupled Amplifier
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial, Commercial |
Model Number | ET-RCA |
Enclosed In | Wooden/plastic box |
Indicator Type | LED |
PCB Type | Glass Epoxy SMOBC PCB |
Interconnections | 2mm banana Patch cords |
RC Coupled Amplifier is used to study RC coupled amplifier using BJT.This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study RC coupled amplifier using BJT.
On board circuit to study amplification in single and double stage.
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-RCA
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Op-amp Instrumentation Amplifier Trainer
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Excel |
Model | ET-Instr |
Condition | New |
Type | Analog |
Is It Portable | Portable |
Usage | Laboratory |
ET-INSTR is used to study instrumentation amplifier using op-amp..
This kit has been designed keeping students in mind so its very easy to understand and use
Specification:-
On board circuit to study instrumentation amplifier using op-amp.
On board test points to analyse the signal
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-INSTR
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Emitter Follower Amplifier Trainer
Minimum Order Quantity: 1 Piece
Product Brochure
Model | ET-EFA |
Usage/Application | Industrial |
Indicator Type | LED |
Interconnections | 2mm banana Patch cords |
Enclosed In | Wooden/plastic box |
PCB Type | Glass Epoxy SMOBC PCB |
Emitter Follower Amplifier Trainer is used to study emitter follower amplifier using Darlington. This kit has been designed keeping students in mind so its very easy to understand and use
Details:-
On board circuit to study emitter follower amplifier using darlington.
On board knob for varying amplitude.
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-EFA
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Class B Push Pull Power Amplifier Trainer
Minimum Order Quantity: 1 Piece
Product Brochure
Model | ET-PPAB |
Usage | Industrial |
PCB Type | Glass Epoxy SMOBC PCB |
Interconnections | 2mm banana Patch cords |
Enclosed In | Wooden/plastic box |
Indicator Type | LED |
Class B Push Pull Power Amplifier Trainer is used to study CLASS B push pull power amplifier.This kit has been designed keeping students in mind so its very easy to understand and use
Details:-
On board circuit to study class-b push pull power amplifier.
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-PPAB
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Log And Antilog Amplifier Trainer
Minimum Order Quantity: 1 Piece
Product Brochure
Model | ET-LAA |
Usage | Industrial |
Indicator Type | LED |
PCB Type | Glass Epoxy SMOBC PCB |
Interconnections | 2mm banana Patch cords |
Enclosed In | Wooden/plastic box |
Log And Antilog Amplifier Trainer is used to study log and antilog amplifier.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study log and antilog amplifier using op-amp.
On board POT for varying amplitude of input signal.
On board test point to analyse the signal
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-LAA
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Tuned Amplifiers
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | EXCEL |
Color | Blue |
Condition | New |
Model Number | ET-TA |
Power | 220V |
Is It Portable | Portable |
ET-TAMP is used to study tuned amplifiers. This kit has been designed keeping students in mind so its very easy to understand and use.
Specification:-
On board circuit to study tuned amplifiers.
On board test points to analyse outputs
ON/OFF switch and LED for power indication.
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-TAMP
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Astable And Monostable Multivibrators Using IC555
Model Number | ET-AMMV |
Application | Industrial, Commercial |
Indicator Type | LED |
PCB Type | Glass Epoxy SMOBC PCB |
Interconnections | 2mm banana Patch cords |
Enclosed In | Wooden/plastic box |
Astable And Monostable Multivibrators Using IC555 is used to study Astable and Mono stable multivibrator using IC555.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study Astable Multivibrator
On board circuit to study Monostable Multivibrator
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-AMMV
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Phased Locked Loop Using Ic 565
Minimum Order Quantity: 1 Piece
Model | ET-PLL |
Usage/Application | Industrial, Commercial |
Usage | Laboratory |
PCB Type | Glass Epoxy SMOBC PCB |
Enclosed In | Wooden/plastic box |
Interconnections | 2mm banana Patch cords |
Indicator Type | LED |
Phased Locked Loop Using Ic 565 is used to study operation of phase locked loop using IC 565.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:-
On board circuit to study PLL
On board test points to analyse the signal
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-PLL
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Triangular/ Square Wave Generation Using Harmonic
Minimum Order Quantity: 1 Piece
Usage/Application | Laboratory |
Power Supply | 220V |
Condition | New |
Is It Portable | Portable |
Type | Analog |
ET-TSGH is used to study triangular/square wave generation using harmonics.
This kit has been designed keeping students in mind so its very easy to understand and use
Specification:-
On board circuit to study generation of sine wave
On board circuit to study generation of second harmonic
On board circuit to study generation of third harmonic
On board variable voltage supply 1.2v to 12v
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-TSGH
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Power Amplifier
Minimum Order Quantity: 1 Piece
Product Brochure
Usage | Laboratory |
Type | Analog |
Model Number | ET-PA |
Input Voltage | 220v |
Is It Portable | Portable |
Condition | New |
ET-PA is used to study power amplifier, complementary-symmetry amplifier & push-pull amplifier.
This kit has been designed keeping students in mind so its very easy to understand and use.
Specification:-
On board circuit to study single-ended power amplifier.
On board circuit to study complementary-symmetry amplifier.
On board circuit to study push-pull amplifier.
On board test points to measure outputs
ON/OFF switch and LED for power indication.
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Differential Amplifier Kit
Minimum Order Quantity: 1 Piece
Product Brochure
Display Type | Analog |
Usage | Industrial |
Brand | Excel |
Type | Analog |
Material | Metal |
Is It Portable | Portable |
Condition | New |
ET-DIF-A is used to study differential amplifier.
This kit has been designed keeping students in mind so its very easy to understand and use.
Specification:-
On board circuit to study differential amplifier.
On board switch for input from signal generator.
On board two inputs.
On board two outputs.
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-DIF-A
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
FET RC Coupled Amplifier
Minimum Order Quantity: 1 Piece
Product Brochure
Model Number | ET-FET-RC |
Interconnections | 2mm banana Patch cords |
Enclosed In | Wooden/plastic box |
Application | Industrial, Commercial, Labs |
Indicator Type | LED |
PCB Type | Glass Epoxy SMOBC PCB |
FET RC Coupled Amplifier is used to study RC coupled amplifier using FET.
This kit has been designed keeping students in mind so its very easy to understand and use.
Details:
On board circuit to study RC coupled amplifier using FET.
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-FET-RC
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Class Ab Push Pull Amplifier
Minimum Order Quantity: 1 Piece
Product Brochure
Model | ET-PPAAB |
Power Supply | 220V |
Condition | New |
Voltage | 220V |
Type | Analog |
Is It Portable | Portable |
Usage | Laboratory |
ET-PPAAB is used to study CLASS AB push pull amplifier.
This kit has been designed keeping students in mind so its very easy to understand and use
Specification:-
On board circuit to study class-AB push pull amplifier.
On board POT for varying amplitude of input signal.
On board test point to analyse the signal
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-PPAAB
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX
Common Collector Amplifier
Minimum Order Quantity: 1 Piece
Product Brochure
Model Number | ET-CCA |
Usage | Laboratory |
PCB Type | Glass Epoxy SMOBC PCB |
Enclosed In | Wooden/plastic box |
Indicator Type | LED |
Interconnections | 2mm banana Patch cords |
Common Collector Amplifier is used to study common collector amplifier.
This kit has been designed keeping students in mind so its very easy to understand and use
Details:-
On board circuit to study common collector amplifier.
On board POT for varying amplitude of input signal.
On board test point to analyse the signal
ON/OFF switch and LED for power indication.
Bare board Tested Glass Epoxy SMOBC PCB is used.
Block Description Screen printed on glassy epoxy PCB
All interconnections are made using 2mm banana Patch cords
Supplied with User manual and patch cords
With built-in power supply
Enclosed in a wooden/plastic box
Additional Information:
- Item Code: ET-CCA
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Delhi
- Delivery Time: 4-6 Weeks
- Packaging Details: CORRUGATED BOX