Call 08046051612 48% Response Rate

Send Email

CONTROL LABS

Leading Manufacturer of linear system simulator, potentiometric error detector, compensating design set up, dc position control system, dc speed control system and stepper motor control system from Noida.
Linear System Simulator

Linear System Simulator

Product Price: Rs 20,700 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Automation GradeAutomatic
ConditionNew
TypeElectrical
BrandExcel
ModelLSS
Usage/ApplicationLaboratory
Power220V

ET-LSS set up is designed to study the time response of simulated linear systems.This kit has been designed keeping students in mind so its very easy to understand and use.

Specification:-

Amplifier gain : Calibrated variable (Resolution 1 :500)

Signal sources : Square wave and Triangular 

 

Frequency : Square wave 20 - 80 Hz, Continuously Variable Triangular wave similar to square wave both in frequency and amplitude

Amplitude : 0-2V approximately

Uncommitted amplifier System : One for phase adjustment

Configuration : Sockets are provided at each block to make different order and type by connecting through patch cords Controller

Power supply : Built in IC regulated power supplies

Cabinate : Housed in rigid MS powder coated with moulded frame

Mains : 230V/50Hz AC

Dimension : 410x260x160mm (approx)

Instruction manual : one

 



Additional Information:

  • Item Code: ET-LSS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Potentiometric Error Detector

Potentiometric Error Detector

Product Price: Rs 28,750 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
MaterialMetal
Is It PortablePortable
BrandExcel
Modelet-ped
UsageLaboratory
ConditionNew
TypeElectrical

ET-PED set up is designed to study the uses in control applications because of their simplicity. To measure output variables and made comparison between reference and feedback is quite simpler in these transducer .This kit has been designed keeping students in mind so its very easy to understand and use.

 

Specification:-

Potentiometer :Configurable as P, PI, PD and PID

Type of operation :DC and AC signal operation

Display : 3.5 Digital Panel Meter for Measurements

Excitation operation: IC regulated DC excitation for both potentiometers (DC operation) AC excitation at 400 Hz approx. (AC operation)

Balanced demodulator :Built in demodulator circuit (balanced demodulator) for C.R.O observation

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder with moulded frame

Mains :230V/50Hz AC

Dimension : 410x260x160mm ( approx.)

Instruction manual : one



Additional Information:

  • Item Code: ET-PED
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Compensating Design Set Up

Compensating Design Set Up

Product Price: Rs 28,750 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
UsageLaboratory
Automation GradeManual
ConditionNew
TypeAnalog
BrandEXCEL
ModelET-CD

ET-CD set up has facilitate to study and design

implementation of compensation networks.This kit has been designed keeping students in mind so its very easy to understand and use.

Specification:-

Compensators : Individual lag, lead & lag lead compensating circuits

simulated systems : Second order simulated systems

Amplifier : One Error amplifier ,with multi turn precision potentiometer with calibrated dial

frequency : Spot frequency square wave generator with fix frequency & amplitude

Signal sources : Sine wave continuously variable in two decades ( 10 - 1000 Hz ) with 0 – 8Vpp Amplitude

Phase angle meter : Digital Phase angle meter 0-180 degree

Block : Error detector

Amplifier : Gain compensating with calibrated dial

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Mains : 230V/50Hz AC

Dimension : 410x260x160mm ( approx.)

Instruction manual : one



Additional Information:

  • Item Code: ET-CD
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
DC Position Control System

DC Position Control System

Product Price: Rs 32,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Display TypeDigital
BrandEXCEL
UsageLaboratory
MaterialMild Steel
Frequency50 Hz
Power12 V
ShapeRectangular

ET-DCMPCS set up is designed to study of dc motor position control system called servo mechanism and comes first in automatic control systems. This kit has been designed keeping students in mind so its very easy to understand and use.

Specification:-

Potentiometer : Two 360 servo -potentiometers with calibrated dials with resolution for reference and output position

DC motor : 12V/1A geared PM motor ( 50 / 60 RPM )

Tacho feedback : 12V/1A geared PM motor (50 / 60 RPM )

Tacho constant : Calibrated tacho constant 0.2 to 1 in steps

Signal : Built in step signal for dynamic Response

Gain : Calibrated forward path gain 3 to 10 In steps

Motor unit : The motor unit is housed in a Separate cabinet with transparent cover for easy viewing. nterconnection with the main unit is through a standard 9-pin D-type connector.

Display : 3½ digit LED is available on the panel for the measurement of various signals

Storage : Digital storage of transient response (step mode) through built in waveform capture /display card for study dynamics in step mode

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Mains : 230V/50Hz AC

Dimension : 410x260x160mm ( approx.)

Instruction manual : one



Additional Information:

  • Item Code: ET-DCMPCS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
DC Speed Control System

DC Speed Control System

Product Price: Rs 32,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
ModelET-DCMSCS
UsageIndustrial
Indicator TypeLED
PCB TypeGlass Epoxy SMOBC PCB
Interconnections2mm banana Patch cords
Enclosed InWooden/plastic box

DC Speed Control System setup is designed to study of speed control process of a small dc motor.This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

Potentiometer : Two 360 servo -potentiometers with calibrated dials with resolution for reference and output position

Tacho constant : Calibrated tacho constant 0.2 to 1in steps

Signal : Built in step signal for dynamic Response

Gain : Calibrated forward path gain 3 to 10 In steps

Motor unit : The motor unit is housed in a Separate cabinet with transparent cover for easy viewing.Interconnection with the main unit is through a standard 9-pin D-type connector.

Display : 3½ digit LED is available on the panel for the measurement of various signals

Storage : Digital storage of transient response (step mode) through built in waveform capture /display card for study dynamics in step mode

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Instruction manual : one



Additional Information:

  • Item Code: ET-DCMSCS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Stepper Motor Control System

Stepper Motor Control System

Product Price: Rs 28,750 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationIndustrial, Commercial
Model NumberET-SMCS
Torque2.8 kgcm
MotorStepper with 1.8 degree step,6V/1A/phase
Mains230V/50Hz AC
Dimension410x260x160mm ( approx.)

Stepper Motor Control System is designed to study of a small step-per motor fitted with calibrated dial and servo potentiometer in see through cabinate.This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

Running mode : Three Step,Free run and wooble

Motor unit : The motor unit is housed in separate cabinet with transparent cover for easy viewing. Interconnection with the main unit is through a standard 9-pin D-type connector.

Microprocessor kit :One with standard features and application software

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Instruction manual : on



Additional Information:

  • Item Code: ET-SMCS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
AC Motor Position Control System

AC Motor Position Control System

Product Price: Rs 32,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
ApplicationLabs
Mounting TypePanel Mount
Model NumberET-ACMPCS
Phase3
Mains230V/50Hz AC
Dimension410x260x160mm ( approx.)
AC Motor110 V two phase servo motor

AC Motor Position Control System is designed to study of ac motor position control system .The set up comprises two parts the motor unit and the control unit. .This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

Potentiometer : Two 360 servo – potentiometers with calibrated dials with 1 resolution for reference and output position

AC motor : 110V two phase servo motor

Signal : Built in step signal for dynamic response

Gain : Calibrated forward path gain 3 to 10 in steps

Motor unit: The motor unit is housed in separate cabinet with transparent cover for easy viewing. Interconnection with the main unit is through a standard 9-pin D-type connector.

Storage : Digital storage of transient response (step mode) through built in waveform capture /display card for study dynamics in step mode

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Instruction manual : on



Additional Information:

  • Item Code: ET-ACMPCS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Synchro Transmitter- Receiver

Synchro Transmitter- Receiver

Product Price: Rs 26,450 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
ModelET-STR
No of Sockets for Rotar2
No of Sockets for Stator3
ApplicationIndustrial, Commercial, Labs
Mains230 V / 50 Hz AC
Dimension410 x 260 x 160 mm ( approx.)

Synchro Transmitter- Receiver is designed to study of remote transmission of position in AC servo mechanisms. These are also called as torque transmitter – receiver. This kit has been designed keeping students in mind so its very easy to understand and use.


Details
:-

Transmitter : Fitted with dial for input/output angular displacement with graduation with 20 resolution

Receiver : Fitted with dial for input/output angular displacement with graduation with 20 resolution

Observation : Sockets for Rotor ( R1, R2 ) Stator (S1, S2, S3 ) on panel with attenuated output on sockets for view of signal observation on CRO

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Instruction manual : on



Additional Information:

  • Item Code: ET-STR
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Control Transformer Trainer

Control Transformer Trainer

Product Price: Rs 8,300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
ApplicationIndustrial, Commercial, Labs
Model NumberET-CT
Height160 mm ( approx.)
Mains230 V / 50 Hz AC
Length410 mm ( approx.)
Width260 mm ( approx.)

Control Transformer Trainer is designed to study of remote transmission of position in AC servo mechanisms. These are also called as torque transmitter – receiver. This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

Transmitter : Fitted with dial for input/output angular displacement with graduation with 20 resolution

Receiver : Fitted with dial for input/output angular displacement withgraduation with 20 resolution

Observation : Sockets for Rotor ( R1, R2 ) Stator (S1, S2, S3 ) on panel with attenuated output on sockets for view of signal observation on CRO

Power supply : Built in IC regulated power Supplies

Cabinet : Housed in rigid MS powder With moulded frame

Instruction manual : on



Additional Information:

  • Item Code: ET-CT
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Magnetic Amplifier Trainer

Magnetic Amplifier Trainer

Product Price: Rs 13,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Length410 mm ( approx.)
Output Current0 - 1 A / 1. 5 A / 2 A / 3A
Mains230 V/ 50 Hz AC
Width260 mm ( approx.)
Output Voltage0-30 V (dual)
Height160 mm ( approx.)
TypeElectrical
Usage/ApplicationLaboratory
Product TypeEXCEL
Automation GradeAutomatic
Power Supply220V
Model NumberET-MAT
MaterialMetal
UsageIndustrial
Voltage220V
Is It PortablePortable
ConditionNew

Magnetic Amplifier Trainer is designed to study of magnetic amplifier or Magamp. . This kit has been designed keeping students in mind so its very easy to understand and use.


Details:-

Diode : Two

Dc bias : Regulated DC bias voltage sockets to connect saturable reactor

AC supply : Fixed AC supply voltage for loadWinding

Saturable reactor : Four internally wired two ends

Bias current : Continuously variable

Switch : one for changing bias polarity

Display : Digital ammeter for AC load Digital milliammeter for dc bias Current

Observation : Sockets for measure control Winding voltages(DC bias voltages)

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Instruction manual : on



Additional Information:

  • Item Code: ET-MA
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Speed- Torque Characteristics Of AC Servo Motor

Speed- Torque Characteristics Of AC Servo Motor

Product Price: Rs 28,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationIndustrial
Accuracy2 %
Display TypeDigital
BrandExcel
MaterialMild Steel
Frequency50 Hz
ShapeRectangular

ET-STCAC is designed to study of AC servo motor speed – torque characteristics .This kit has been designed keeping students in mind so its very easy to understand and use

Specification:-

Motor : Two phase ac servo motor ( 1500RPM )housed in Aluminum case for Cool operation

Sensor : Electronic speed sensor with RPM Display upon panel meter

Loading

arrangement : PMDC motor for loading(12V/1A)

Switch : One for variable isolated (on/off through separate switch) supply for AC servomotor with speed control One for DC supply (on/off through switch) with potentiometer to vary PMDC motor current.

Display : Digital ammeter for load current Digital RPM meter for speed

Observation : Sockets for measure control Winding voltages(DC bias voltages)

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Mains : 230V/50Hz AC

Dimension : 410x260x160mm ( approx.)

Instruction manual : one



Additional Information:

  • Item Code: ET-STCAC
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Speed- Torque Characteristics Of DC Servo Motor

Speed- Torque Characteristics Of DC Servo Motor

Product Price: Rs 8,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationIndustrial
ModelET-STC
Motor TypeDC
BrandMitsubishi
PhaseSingle Phase
Power220V

ET-STCDC is designed to study of DC servo motor speed – torque characteristics .This kit has been designed keeping students in mind so its very easy to understand and use

 

Specification:-

Motor : Separately excited DC servomotor housed in separate rigid MS powder coated cabinate with moulded frame having front side see through cover

Loading

arrangement : Belt and pulley loading for torque measurement having high precision spring balance to read load separately adjustable with lead screw motion.

Display : Two digital meters (selected through switch) to take readings of volt and current for field and armature Digital RPM meter

DC supply : Separate field and armature dc supply (current protected)

Power supply : Built in IC regulated powerSupplies

Cabinate : Housed in rigid MS powder With moulded frame

Mains : 230V/50Hz AC

Dimension : 410x260x160mm ( approx.)

Instruction manual : one



Additional Information:

  • Item Code: ET-STCDC
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Light Intensity Control System Trainer

Light Intensity Control System Trainer

Product Price: Rs 25,300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Model NumberET-LICS
Mains230V/50Hz AC
Dimension410x260x160mm ( approx.)
Display3.5. digit digital voltmeter
ApplicationIndustrial, Commercial
CabinateHoused in rigid MS powder with moulded frame

Light Intensity Control System Trainer is designed to study of. This kit has been designed keeping students in mind so its very easy to understand and use


Details:-

Light source : 3 miniature bulbs controlled by solid state regulator

Disturbance source : 2 miniature lamps to add Disturbance

Measurement : LDR based intensity measurement.

Error detector : Op-amp for close loop operation

Amplifier : Gains selection from 1 to11 in linear Steps

P-I controller : To improve the speed and to minimize control error

DC source : Variable dc voltage source

Signal sources : Two with constant amplitude and variable frequency

1. Square wave

2. Triangular wave

C.R.O. Interface : Sockets for XY to connect CRO for dynamic response

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder with moulded frame

Instruction manual : one

 



Additional Information:

  • Item Code: ET-LICS
  • Pay Mode Terms: L/C (Letter of Credit)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Digital Pid Controller

Digital Pid Controller

Product Price: Rs 19,000 / PieceGet Best Price

Product Details:
Proportional Band1% to 50 %( Gain 0 - 20 )
Integral Time10 mS - 100 mS
Derivative Time0 - 20 Ms
Square Wave0 - 2Vpp at 10 - 40 Hz (typical ) variable
Mains230V/50Hz AC
Dimension410x260x160mm ( approx)

PID Controllers up is designed to study performance of analog PID controller with simulated process. This kit has been designed keeping students in mind so its very easy to understand and use.

Details:

PID Controller :Configurable as P, PI, PD and PID

 

Signal sources

  • Square wave 0 - 2Vpp at 10 - 40 Hz (typical ) variable

  • Triangular wave 0 - 2Vpp at 10 - 40 Hz ( typical ) variable


Simulated blocks

Four configurable as first, second

Order Type-0 &type 1 systems


Potentiometer

Three individual ten multiturn

Precision potentiometer for P, I, & D


Uncommitted : 

One (Av-1)

Amplifier


Delay

Simulated delay circuit to observe effect of dead time.


Power supply

Built in IC regulated power supplies


Cabinate

Housed in rigid MS powder coated with moulded frame

 

Instruction manual : 

1



Additional Information:

  • Item Code: ET-PID
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Servo Voltage Stabilizer

Servo Voltage Stabilizer

Product Price: Rs 10,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Brandexcel
Automation GradeAutomatic
Control TypeDigital controller
ConditionNew
Cooling TypeAir Cooled
Product TypeElectric
TypeManual
MaterialIron
PhaseSingle Phase

ET-SS is designed to study of AC servomotor speed – torque characteristics. This kit has been designed keeping students in mind so its very easy to understand and use

Specification:-

Dimmer : 1 KVA with servomotor output sense Transformer

Loads : Heating elements

Process : Loop Process with variable gain

Meter :AC voltmeter

Observation : Sockets for measure output voltage (fed to motor) measurement

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Mains : 230V/50Hz AC

Dimension : 410x260x160mm ( approx.)

Instruction manual : one

 

 

 

 



Additional Information:

  • Item Code: ET-SS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Relay Control System

Relay Control System

Product Price: Rs 19,250 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
ModelET-RCS
Dead ZoneVariable from 0-600mV (approx.)
HysteresisVariable from 0-500mV (approx.)
Amplitude 0-1 V (min.) Variable
Frequency100 Hz
Mains230V/50Hz AC

Relay Control System is designed to study of relay control system characteristics. This kit has been designed keeping students in mind so its very easy to understand and use


Details
:-

Relay :System with electronic relay (simulated)

Signal : sine in built

Display : phase plane on CRO

Process : Simulated 2nd order non-linear

C.R.O. Interface : Facility for displaying x and y.

Power supply : Built in IC regulated power Supplies

Cabinate : Housed in rigid MS powder With moulded frame

Instruction manual : one

 



Additional Information:

  • Item Code: ET-RCS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback
Digital Stroboscope Tachometer

Digital Stroboscope Tachometer

Product Price: Rs 30,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Packaging TypeBoxes
Mains230V/50Hz AC
Dimension410x260x160mm ( approx.)
ApplicationsIndustrial, Commercial
Brandexcel
ModelET-STO
Usage/ApplicationLaboratory

Stroboscope is designed to measure such rotating object revolutions from 9000 RPM, sufficient

formost applications. This kit has been designed keeping students in mind so its very easy to understand and use

Details:-

Speed measurement : Non-contact through high intensity flashes no error due to friction drive, suitable for small motors and also motors in inaccessible locations

Light source : High intensity LED flash operation possible from a reasonable distance (0.5m) in usual ambient light in a room.

Display :4-digit direct speed reading in RPM operating range of 300-9900 rpm, resolution 1 rpm. High accuracy crystal controlled LED display.

Power supply : Built in IC regulated power supplies

Cabinate : Housed in rigid MS powder with moulded frame

Instruction manual : One



Additional Information:

  • Item Code: ET-STO
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Delhi
  • Delivery Time: 4-6 Weeks
  • Packaging Details: Corrugated Box
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Excel Technologies. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.